Automatic Screw Feeding Machine With Electric Screwdriver Air Blow Feeding Screws
Intro:
1. Applicable screw range: M2-M6.
2. The screw head patterns used are: flat, cross, triangle, plum blossom, hexagon socket, H head, etc.
3. The surface treatment methods of screws used are: electric nickel, black pot, color zinc plating, white zinc plating, copper plating, etc.
4. The screw materials used are iron, copper, stainless steel, etc.
5. The material of the lock screw product: plastic, iron, aluminum, etc.
6. Hand-held lock screw machines are widely used in various industries, such as mobile phones, hard disks, keyboards, gaming
Assemble in electronic processing plants such as tools, LCD/LED modules, communication equipment, electrical appliances, toys, and auto parts.
Suitable:
Screw requirement for Low cost Automatic Screw Feeder With Screwdriver Set:
1. b>=1.3* D
2. Screws should be M2 to M6. 2mm<=d<=6mm
3. 3.5mm<=D<=11mm (D can be Max20mm. It should be better within 3.5-11mm.
Specification:
Low cost Automatic Screw Feeder With Screwdriver Set
| Applicable screws | M2-M6 |
| Efficiency | 50-70pcs/min depend on screw length |
| Screw pocket volume | M2 X 6 5000PCS |
| Speed | 3-5sec/pcs |
| Max Torque | 1-4M |
| Input | 220V/50HZ |
| Power | 30W |
| Machine size | L670*W550*H610mm |
| Noise | below 65DB |
| Weight | 20kg
|
Features:
1. Convenient, one hand can be freed to support the product to be locked when screwing, and a positioning jig can be saved for small products
2. Fast, because it completely eliminates hand movement, grabbing screws, moving, screw aligning with the screwdriver and other actions, there is no waiting time at all, just align the screw holes and lock the screws.
3. Clean, because the action of removing the screw by hand is omitted, it will not cause secondary pollution to the product due to the stain produced when removing the screw by hand, and the screw will be stained by sweat and make it more rusty.
Working conditions:
1, Screw specification requirements:
The screw length should be over 1.3 times greater than the screw cap’s diameter.
If the screw cap is greater than the screw length, the screw cap may come out first, because the screw will turn over during feeding screws.
The screw length should be less than 45mm.
Welcome to contact our automatic screw feeding machine
|
|
Automatic Screw Feeding Machine With Electric Screwdriver Air Blow Feeding Screws Images
|
